Sunday, July 27, 2014

Beautiful Auroara Tube

Hey all here is my Auroara Tube she is dressed with a dragons shorts and jacket outfit.  There is 10 Tubes with different poses.  She will be an amazing addition to any of your creations.  You can buy her at the link below.





Tuesday, July 15, 2014

PTU Tut & CT for Whisper In The Wind

Hey all this is a CT tut for Whisper In The Wind below are the supplies I have used for this tutorial.  This tut is my own and any resemblence to any other is by coincidence only.  This tut is assuming you know about Paint shop Pro.






Supplies:

Kit: Blessedbe Whisper In The Wind  http://whisprddreamz.blogspot.com/

Tube: ©Hellana www.malefice.net

Template 51 Kristin/Toxic Desirez http://toxicdesirez.blogspot.com

Font of choice

Filters Eyecandy4, and Xenofex2

Animations: Scrappy Bit Of Fun SimoneAni-LadyVampire 7,1,and 2

Tutorial:


1. Delete words,flames,Background layers and credits.
2. Resize canvas to 600 X 622
3. Go to LGRectangle select select all float defloat paste into selection paper5
4. Go to Lgrectangle again select all float defloat make a new raster layer and copy and paste element 55 into selection.
5. Duplicate LGRectangle and go to Xenofex2 little fluffy clouds use your own settings to your liking and apply go to the blend and select Luminance(L)
6. Copy and paste tube as you like go to eyecandy4 shadowlab and use the default setting except for Center Offset Direction use 143 and opacity 35
7. On SM Rectangle 1 & 2 select all float defloat copy and paste into selection paper 3.
8. Repeat #7 on Circle layer
9. Go to rectangle layer select all float defloat copy and paste into selection paper 2.
10. On Frame layer select all float defloat and go to adjust add noise monochrome and adjust to your liking.
11. Go to dotted rectangle xenofex2 constallation on settings pick lots of stars and hit random to your liking.
12. Arrange elements as I have mine and add name and copyrights and your all done.

Animation:

1. Open your saved tag into animation shop
2. Duplicate 16 times.
3. Open your animations: SimoneAni-LadyVampire 7,1,and2.
4. Go to your tag select all propagate then go to your 1st animation select all copy then go to your tag edit paste into selected frame place it as I have mine and repeat for each animation.

Your all done.

Thanks for trying my tutorial.

PTU Tut Mysterfeerie Creations

Hey all this is a CT tut for Mysterfeerie Creations below are the supplies I have used for this tutorial.  This tut is my own and any resemblence to any other is by coincidence only.  This tut is assuming you know about Paint shop Pro.




Supplies:

Filters Unlimited 2.0, Eyecandy4000
Template 5: kristinswickedscrapz.blogspot.com
Font of choice
Scrap Kit le monde de blanche neige: ©Mysterfeerie Creations http://mysterfeerie-creation.fr/
Tube: ©NoFlutter http://noflutter.deviantart.com

1. Open template 5 resize 600 X 600
2. Delete credits and background layer
3. Go to small rectangle layer select float defloat and copy and paste into selection  paper2
4. Stay on same layer and don't deselect go to filters unlimited 2 special effects 1 Square Bumps and hit randomize until your desired results.
5. Go to the layer w/princess and flood fill with a color from your tube. Now go to Eyecandy4000 Bevel Boss Change Bevel Width to 29.3, Lighting 204,76 & Bevel Profile to Grooved.
6. Give the princess a gradient glow with eyecandy 4000 to your liking.
7. Colorize dotted rectangle with a color of choice and add noise.
8. On Large rectangle layer select all float defloat and copy and paste papte10 into selection.
9. Repeat #3 on the above layer.
10.Go to crown layer select all float defloat and copy and paste paper6 into selection go to eyecandy 4000 Glass and play with the width until you get a desired look.
11.Place element49 above small rectangle and add a dropshadow with settings of 0,27,34,13
12.Now go to your tube and get a close up copy and paste it on a new layer above your element49 and size as needed so it is in the center of the mirror then make the blend mode Luminance(L)
13.Now go to your small rectangle layer select all float defloat and invert now go to medium rectangle layer and hit delete and move this layer above small rectangle and add noise to it.
14.Now get additional elements or use the ones I have and place them on your tag add name and copyright and your done.

Hope you have enjoyed my tutorial.

PTU Fantasy Dreams tut

Hey all this is a CT tut for Quizzy's Creations below are the supplies I have used for this tutorial.  This tut is my own and any resemblence to any other is by coincidence only.  This tut is assuming you know about Paint shop Pro.




Supplies:

Temp: Rose & Kristin Collab 3 http://toxicdesirez.blogspot.com

Font of choice

Scrapkit:  ©Fantasy Dreams Quizzy's Creations  http://ingridscreationz.blogspot.nl/

Tube©NoFlutter http://noflutter.deviantart.com



1.  Open rose & kristin collab temp4 resize 600 X 600
2.  Delete Layers: Brush, Pixel Words,Wordart,credits,hearts and raster1
3.  Go to oval layer select all float defloat copy and paste into selection paper7
4.  Repeat #3 on the rectangle layer with paper4
5.  Place your tube to your liking I have put mine into selection on a new layer above the oval layer.
6.  Place all elements as I have mine add dropshadows 2,-2,75,6.
7.  On dotted lines layer pick a color from your tube select all float defloat and flood fill with your new color and add noise.
8.  Repeat #7 with dotted rectangle.
9.  Add copyrights and name and your all finished.

Hope you enjoyed.

Wednesday, July 9, 2014

PTU CT tut for Black Widow Creationz

Hey all this is a CT tut for Black Widow Creationz below are the supplies I have used for this tutorial.  This tut is my own and any resemblence to any other is by coincidence only.  This tut is assuming you know about Paint shop Pro.







Supplies:

Template: http://toxicdesirez.blogspot.com

Tube Of Choice: ©NoFlutter http://noflutter.deviantart.com

Font:  Your Choice

Scrapkit: BreatheNoMore by Black Widow Creationz
http://blackwidowcreationz.com/index.php?

1. Open template then shift D which will duplicate it so you can work on the duplicate and close the original template.  Delete Credits
2.  Open tube and Elements: 1,2,3,5,28,29,32,33,34,35,37 Place these as I have mine or arrange to your liking.
3.  On the different layers do each layer at a time and select all float defloat copy the different papers and paste into selection.
4.  Do the same with the film strip and place each element as I have mine.
5.  Place your tube to your liking and add dropshadows to your elements and tube.
6. Add copyrights and names and resize & your all done.





Hope you enjoyed this tutorial.





                    

CT Tut for Dance In The Rain

Hey all here again for another PTU tut for Dance In The Rain.   As usual this is my own creation and similarities are coincidence only and assuming you have knowledge of PSP.  Lets get started.




Supplies:

Scrapkit:  The Haunting  Dance In The Rain 

MuRa's Filters Cloud

Eyecandy 4000 gradient glow

Tube:  ©Helleana 

Template:  Toxic Desirez Scrapz  (Holiday temps download Halloween temp #5)


1. Open Template we will resize after we are done delete Wordart,Wordart Black, pixel words, Bat and Bats layers.
2. Go to Left Circle Green layer on the template and select all float defloat now Flood fill with black.
3. Repeat #2 for Right Circle Green.
4. Go to MuRa's Filters Cloud and use default settings.
5. Go to Gradient Circle layer select all float defloat and copy and paste Paper 2 into selection. Repeat with paper 5 on Thin Circle layer.
6. Open element 1 copy and paste it in a new layer above gradient circle layer resize it to fit in the picture then add your gradient glow.
7. Go to Rectangle layer select select all float defloat then copy and paste into selection paper12.
8. Place your tube as desired.  My tube was just half so I placed her into the center scene. Made Gradient Circle active select select all float defloat then went to Circle layer and hit delete then moved that layer above my tube layer so that I would have a boarder around the Gradient circle and my tube.
9. Add noise to your circle layer. On Dotted Circle Layer Add Xenofex2 Constellation.
10. No Open Elements:1,29,42,44,51,54,65,70,74,96,&97 and place them as I have mine.  Add your dropshadows, copyrights, and names then your all done.

Hope you enjoyed my tutorial.

Monday, July 7, 2014

Mysterfeerie Creation CT

Hey Everyone Here is my PTU CT Tut for Mysterfeerie Creation.  This tutorial is my own and assuming you have knowledge of PSP.




Supplies:

Font of Choice

Eyecandy 4000 gradient glow

Filters Unlimited: Edges Round, Round Edge 1

Scrapkit:   Mysterfeerie Creation The Imaginary World Of Peter 


Tube ©Beth Glimmer N Sparkel


1. Open 600 X 600 canvas
2. select select all copy and paste paper 1 into selection
3  Open element 16 and place in center of paper merge visible
4. Go to Filters Unlimited: Edges Round, Round Edge 1 apply
5. Place your tube as I have mine or as you wish for your liking.
6. The elements I used are: Paper 1,  Elements:  6,14,16,25,26,28,44,60,74
7. Place them as I have mine and add a Dropshadow to each element.
8. Add name and credits and your all done. On the name I used a an inner bevel of: 5;15;16;-15;20;315;38;90 then I used Eyecandy 4000 gradient glow

Thank you for visiting and hope you enjoyed my tutorial.

Saturday, July 5, 2014

New CT for Pandora


Hey all back with another PTU tut for Pandora an amazingly talented kit maker.  This one is Goth Girl Glam Hope you enjoy.






Supplies:

Kit: ©Pandora http://missrobinann.blogspot.com
Tube of Choice: ©Helleana www.malefice.net
Font of choice
Template 224 http://toxicdesirez.blogspot.com
Eyecandy 4000: Gradient Glow
Xenofex 2 :Constellation , xenofex 2 titanium
Penta dot cross, & Penta Jeans
Animation by Missy http://divineintentionz.blogspot.com
(Pixi Dust2 under New Anis download)

Open Template and resize 600 X 525
Colorize all pink colors to a color in your tube.
Raster 5 use Penta dot cross:160,10,5
Raster 4 use Penta Jeans:22,5
Raster 7 and on copy raster 7 use Xenofex 2: titanium: hit random until your desired effect
on copy of raster 9 select select all float defloat and copy and paste paper 1 into selection
Repeat above with raster 9 with paper 9
Repeat above with raster 6 and copy of raster 6 with paper 8
select copy of raster 11 layer select all float defloat and floodfill with a gradient then xenofex 2 titanium hit random until desired result
Do the same as above with raster 11
Go to skull and recolorize to match your sig and tube.
Go to raster 12 and go to xenofex 2 constellations and use your desired effect.
Next place your tube under Raster 12 copy tube and paste above raster 12 now on the copy of the tube erase the bottom of the tube like mine add dropshadow of your choice.
Place your elements as I have mine.
Add your name and copyrights and your done except animation.

Animation:

Take your finished tag in animation shop.
Copy 21 times select all propagate copy animation then go to your tag and paste into frame.
Check your animation and your all done.

Tuesday, July 1, 2014

Happy 4th Freebie PSP Poser Tube

Hey all here is my newest poser.  In celebration of the 4th here is a lovely lady ready to celebrate.  There are 6 different poses ready to decorate your creations.  Hope you enjoy and please leave comments if you download her.